地 址：大連保稅區海航路9號
特點及應用范圍
切口寬度：500mm
切削速度：44m/min
應用：高操作速度、產量、價值特別高的去筋膜機
適合工業行業
安全注意事項：去除豬肉、牛肉、小牛肉、羊肉、火雞、野味、家禽的筋膜；
適合加工較大的肉塊，如豬里脊
high precision transport roller without grooves and spring suspended blade holder for very low loss of expensive meat
無環形槽的高精度輸送輥和彈簧懸掛刀片架，可降低昂貴肉品的損失
NEW: Storage plate for centering the stacking container (E1, E2), can be removed without tools
新：用于對中堆疊容器（E1、E2）的存儲板，無需工具即可拆除
NEW: Access protection at the rear for more safety at work
新功能：后部的通道保護裝置可提高工作時的安全性
dynamic (counter rotating) stainless steel cleaning roller and the NOCK Air Jet compressed air cleaning system keep the transport roller constantly clean during operation. Thereby reliable gripping, quick and easy processing and an excellent operational hygiene are guaranteed.
動態（反向旋轉）不銹鋼清潔輥及NOCK 空氣噴射壓縮空氣清潔系統可保證輸送輥在運行過程中始終保持清潔。從而保證了抓握可靠，加工處理快速、容易，衛生良好。
blade holder with captive screws 帶固定螺釘?shù)牡都?/p>
fine adjustment of the blade gap to skin products with thick membrane (e.g. beef)
對于筋膜較厚的肉品（如牛肉）進行刀片間隙精確調整
adjustable pressure reducer
可調減壓裝置
boxes can be placed under the machine from the front or back
可以從機器的前面或后面配備肉品收集罐
ergonomic favourable safety foot switch bar, adjustable in height
人體工學設計，高度可調節的腳踏開關
15 mm thick NOCK POWER PLATES® installed in the machine casing provide constant precision and service friendliness
15mm厚的諾克加強板安裝在機殼內，保證精度恒定，易于維護
safety switch for processing table
工作臺安全開關
lockable castors
可制動的導向輪
stainless steel
不銹鋼
